Rangefinders (landing page)ΒΆ
Copter/Plane/Rover support a number of different rangefinders including Maxbotix Sonar and Pulsed Light LED range finders.
Note
Downward facing Lidar are used in flight modes which have height control, such as Altitude Hold, Loiter and PosHold Mode. The data from the sensor will be used until you exceed RNGFND_MAX_CM, after that it switches to the barometer.
Copter-3.4 (and higher) includes support for Terrain Following in Auto mode.
Copter-3.5 (and higher) can use lidar for object avoidance.
Warning
RNGFND_MAX_CM must be set to a tested, appropriate value. If RNGFND_MAX_CM is set to a value greater than the range of the sensor, the flight controller will not respond correctly to the data provided.
Follow the links below (or in sidebar) for configuration information based upon your set-up.
- Attollo Engineering Wasp200
- Benewake TF02 / TF03
- Benewake TFmini / TFmini Plus
- Garman Lidar-Lite
- Leddar One Lidar
- LightWare SF20 / LW20 Lidar
- LightWare SF10 / SF11 Lidar
- Lightware SF02 Lidar
- Lightware SF40c (360 degree)
- Maxbotix I2C Sonar
- Maxbotix Analog Sonar
- RPLidar A2 360 degree laser scanner
- ST VL53L0X / VL53L1X Lidar
- TeraRanger One Rangefinder
- TerraRanger Tower (360 degree)
- Underwater Sonar
- Analog Sonar (AC3.1)